• PACK 1—SOFTWARE

    NEW FIRMWARE FOR THE PRECISE

    CAMERA MOVEMENT

     

    We’ve released a new firmware for controlling the cameras motorization:

    • TOTAL POSITIONING PRECISION
    • JUST AN EPROM CHIP TO CHANGE ON THE MOTOR DRIVE

  • PACK 2—NEW PRESSURE ROLLER

    NEW PRESSURE ROLLER WITH “NOTCHED ENGRAVED SURFACE

     

    • The bigger diameter and the new notched engraved surface makes the roll softer and capable to press the void areas of the plate
    • Suitable for both adhesive tape and plates
    • Elimination of the labour for sticking the tape and the plates
    • Smooth and constant pressure on all the printing face

  • PACK 3—NEW CAMERA BAR

    NEW CAMERA BAR

     

    The new camera bar is equipped with linear rack/gearing for the motorized cameras linear movement.

    Moreover it is equipped with the new touchless sliding system: the cameras follow the hand of the operator.

    A perfect movement positioning

  • PACK 4—NEW CAMERA BAR WITH HD CAMERAS

    NEW CAMERA BAR WITH HD CAMERAS, FOR MICRODOT MOUNTING

     

    In order to improve the magnification using microdots, it is necessary to switch to HD Megapixel camers with fixed focus, that allow higher magnification of the image.

    With this retrofit kit a new camera bar is installed, equipped with HD megapixel cameras, and a proper mechanics to manage the vertical positioning of the cameras according to the repeat of the job, to match the right focusing length.

     

  • PACK 5—iTABLE

    INSTALLATION OF iTABLE + AUTOMATIC NIP-ROLLER

     

    • iTABLE is the new smart mounting table, with micrometric precise positioning. It holds the plate using a vacuum pump
    • The operator has got a joystick to position the table and the plate hold on it
    • When the operator gives the ok, the machine will start the cycle for the automatic sticking of the plate with the automatic nip-roller, with preset rotations for a smooth sticking on all the round.

     

  • PACK 6—AUTOMATIC PLATE MOUNTER

    TURN YOUR MOUNTER INTO A SEMI-AUTOMATIC MOUNTER

     

    Like the PACK #5, but with the software that gives the machine the ability to recognize the registration mark and automatically make the positioning of the plate and the automatic mounting.

    • SOFTWARE FOR THE PLATE RECOGNIZATION
    • AUTOMATIC POSITIONING OF THE PLATE AND MOUNTING
    • AUTOMATIC STICKING WITH ROLLER

     

     

  • Can our technology also be installed

    on not-SysTec mounters?

    Yes !!!

    Take a look and enjoy!

    Update your old mounter with the latest technology

    Retrofit kits that can be applied on other mounters, in order to upgrade them with our technology and software innovations.

  • Retrofit gallery

    The retrofit kit can be installed on different machines. Here you may see some sample of application:

    Example of retrofit kit installed on Heaford machine
    Detail of retrofit
    Retrofit installed on a old Piolat mounter
    Detail of retrofit

Contáctenos

STI SA

Piazza Indipendenza, 3

CH-6830 Chiasso

Switzerland

+41 91 210 59 07

info@sti-sa.info

Uso de cookies
Utilizamos cookies para garantizar una experiencia de navegación fluida. Al continuar, asumimos que acepta el uso de cookies.
Saber Más